TIGER 210 AC/DC - Qualitas Technology Limited - United Kingdom Website

Go to content

Main menu:

TIGER 210 AC/DC

Our Products > Welding Machines > TIG Welding - Single Phase



The TIGER Range includes the following features:
-

  • The Tiger range offers the user exceptional arc characteristics and control.-

  • All machines will weld at an incredible 3 amps. This coupled with separate control of the Ignition Energy and start current, allow arc striking on the very edge of the thinest of materials.-

  • Our most demanding machine, the 210A AC/DC model, will weld at 210 amps with a 50% duty cycle from a 13 amp UK domestic plug. You can also run an extention lead of up to 100m without effecting the current output! -

  • Intelligent Ignition Control - Ignition energy is infinitely variable between 10% and 99% of the welding current for perfectly smooth arc ignition on both HF and Lift-Arc, offering exceptional control when welding thin materials at low amperage.-

  • Selectable HF Ignition Control - Allows you to tackle the smallest of jobs, even in sensitive electronic and computer environments, offering HF Ignition (which is switched off once the arc is established in both AC and DC modes), Lift-Arc Ignition which establishes the arc without using any HF, allowing for example, the repair of sensitive CNC equipment in hospitals which would normally risk being damaged by high-voltage.-

  • Intelligent Start Current Control - The start current is infinitely variable between 10% and 99% of the welding current for perfectly smooth arc starting on both HF and Lift-Arc, offering exceptional control when welding thin materials at low amperage. Often used with Intelligent Ignition Control.-

  • Pulse Control as standard - Reduced heat input and increased weld quality and control. Especially useful when welding thin materials. Both conventional and high frequency pulsing is available. -Conventional pulsing offers pulse times greater than 0.1 second-High frequency pulsing offers a pulse frequency of between 50 Hz and 500 Hz.-

  • Fully Programmable - The operator can store up to 99 programs, offering total repeatability and job selection at a touch of a button-

  • Dual Wave Mode - For the welding of Aluminium. This new patented process allows far greater control of the weld pool when welding Aluminium out of position and results in significant quality improvements. (AC/DC Machine Only)-

  • AC Wave Balance Control - Wave balance can be adjusted from -80% to +80% allowing the arc to be influenced to enhance greater cleaning or penetration during the welding of Aluminium. (AC/DC Machine Only)-

  • REHM Automatic Frequency Control System - The frequency is automatically adjusted to the current intensity during AC welding. This offers superior arc characteristics along with improved tungsten life and efficiency. For difficult applications, manual adjustment is also available.


TIGER 210 AC/DC Inverter TIG Welding Machine

Part Number

TIGER - Programable Pulsed TIG Inverter

Information

RM.0150-3360

TIG Welding Machine 3-210A - TIGER 210 ACDC Machine Only
210A @ 50% Duty Cycle - Air Cooled - 1-Phase 230v

[image:image-1]

RM.0150-3361

TIG Welding Machine 3-210A - TIGER 210 AC/DC SET
210A @ 50% Duty Cycle - Air Cooled - 1-Phase 230v
Complete Set ready to go in Metal Carry Case

[image:image-3]



TIGER 210 AC/DC TIG SET  

  • Only 8.4 kg in weight!

  • A massive 210 amps @ 50% Duty Cycle

  • Up to 100m input cable may be used


Advanced Inverter Power Source

  • Output current:   3 - 210 Amps

  • Duty cycle:   175 Amps  @ 100 %  (20°C)

  • Input voltage:   230 V / 1 phase 50/60 Hz

  • Fuse Rating:   16 Amp

  • Weight:   8.4 kg

  • Size [mm]:   340x150x275


The TIGER 210 AC/DC TIG SET includes the following features:

  • Intelligent Ignition Control - Ignition energy is infinitely variable between 10% and 99%  of the welding current for perfectly smooth arc ignition on both HF and Lift-Arc, offering exceptional control when welding thin materials at low amperage..

  • Selectable HF Ignition Control - Allows you to tackle the smallest of jobs, even in sensitive electronic and computer environments, offering HF Ignition (which is switched off once the arc is established), Lift-Arc Ignition which establishes the arc without using any HF, allowing for example, the repair of sensitive CNC equipment in hospitals which would normally risk being damaged by high-voltage..

  • Intelligent Start Current Control - The start current is infinitely variable between 10% and 99% of the welding current for perfectly smooth arc starting on both HF and Lift-Arc, offering exceptional control when welding thin materials at low amperage.  Often used with Intelligent Ignition Control..

  • Pulse Control as standard - Reduced heat input and increased weld quality and control.  Especially useful when welding thin materials.  Both conventional and high frequency pulsing is available.  Conventional pulsing offers pulse times greater than 0.1 second, whilst high frequency pulsing offers a pulse frequency of between 50 Hz and 500 Hz..

  • Fully Programmable - The operator can store up to 99 programs, offering total repeatability and job selection at a touch of a button.

  • Dual Wave Mode - For the welding of Aluminium. This new patented process allows far greater control of the weld pool when welding Aluminium out of position and results in significant quality improvements..

  • AC Wave Balance Control - Wave balance can be adjusted from -80% to +80% allowing the arc to be influenced to enhance greater  cleaning or penetration during the welding of Aluminium..

  • REHM Automatic Frequency Control System - The frequency is automatically adjusted to the current intensity during AC welding. This offers superior arc characteristics along with improved tungsten life and efficiency.  For difficult applications, manual adjustment is also available..

  • Full Digital Display

  • Start and Stop Current Control

  • Slope Up and Down Control

  • Pre and Post flow Gas Control

  • Pulse Main Current Time Control

  • Pulse Background Current Time Control

  • Main Current Control

  • Pulse Background Current Control

  • Storage for 99 Programmes

  • Integrated Single Knob Touch Control for complete control of all welding parameters and functions, using easy to read standard Symbols instead of text

  • Excellent MMA welding characteristics

  • Regulator, Flow meter, Earth Return/Clamp 4m

  • Rehm R-SR 7-26-4m Tig Torch c/w potti and leather sheath

  • Rehm Site-work Case

.
Ordering Information:
.
The Tiger may be purchased as a complete set in a Tiger Metal Site Box or just as a power source only, so you can add only the items you require.

REHM TIGER Welding SET
+44 (0)1733 55 830


Sales@QualitasTechnology.co.uk
This is the United Kingdom website for Qualitas Technology Limited
© 2017 Qualitas Technology Limited
Safecontractor Logo
Back to content | Back to main menu