Kemper Welding Fume Filter Systems - Qualitas Technology Limited - United Kingdom Website

Search
Go to content

Main menu

Kemper Welding Fume Filter Systems

Fume Control Equipment > Kemper GmbH

Fume Control Systems

 

The Air Filtration Specialist for Welding Fumes

The Kemper Soldering and Welding Fume Filtration Range - Mobile, Stationary and fixed fume filtration

> KEMPER FUME CONTROL EQUIPMENT - Range Brochure 2008/09

Information

Information

KEMPER RANGE BROCHURE
2008/09

FUME CONTROL SYSTEMS

> KEMPER FUME CONTROL

KEMPER EXHAUST SET
to atmosphere

The KEMPER exhaust set consists of a 2 m, 3 m or 4 m long evacuation arm, a fan with wall bracket and a motor protection switch. For use wherever it is not absolutely necessary to filter the exhaust air.

KEMPER ASPIRATOR 2000
2000 M3/h

The mobile exhaust fan 2000 has a variety of multiple uses. It can either be used for the extraction of welding fumes, dust, car exhaust gases or for the transport of packaging.

KEMPER ASPIRATOR 3000
3000 M3/h

The mobile exhaust fan 3000 is perfect for moving large amounts of air, dusts, welding fumes or the like.
The housing consists of spark proof aluminium casting and the impeller wheel is made of steel.

KEMPER VEHICLEEXHAUST EXTRACTION

Single systems The approved solution for vehicle exhaust extraction at garages and petrol stations. Installation is very easy and can be undertaken by the garage itself.

KEMPER HIGH VACUUM EXTRACTION

Kemper High Vacuum Extraction with four suction port, this extraction and filter unit offers a flexible way of extracting the contaminated air directly at the source.

 

> MOBILE FILTER SYSTEMS

KEMPER FILTER MASTER

The Filter-Master, a mobile mechanical filter, is designed and ideally suitable for use at various welding workplaces and conditions. Built of rigid a sheet metal construction and incorporating an anti corrosive powder coating finish.

KEMPER FILTER MASTER XL

The Filter-Master XL is the basic type of filter units with high efficient KemTex® ePTFE membrane filter cartridges.
A great advantage of KemTex® ePTFE membrane filter cartridges - in addition to its high separation efficiency - is the possibility of cleaning them.

KEMPER MOBILE MECHANICAL FILTER

This mobile welding smoke filter with two exhaust arms offers many advantages for use at changing welding workstations.
The flexible exhaust arms are swivelling by 360° and guarantee easy handling. The flexible exhaust arm can be supplied in lengths of 2 m, 3 m and 4 m with a diameter of 150 mm.

KEMPER MOBILE ELECTROSTATIC FILTER

The KEMPER electrostatic filter unit is suitable for use at changing workplaces.
Bigger particles are captured in a prefilter. The main filter works according to a twostep-system of ionisation and purification.

KEMPER MOBILE CARTRIDGE FILTER

Mobile cartridge filter unit with one or two exhaust arms are suitable for use at changing workplaces. The unit can either be equipped with two flexible exhaust arms or rigid metal tube arms, both rotatable by 360°.

 

> STATIONARY FILTER SYSTEMS

KEMPER STATIONARY SMOKE FILTER

For the use at changing working positions or at two workstations stationary welding smoke filters with two exhaust arms are a cost-saving alternative to two separate units and are very suitable for flexible use in workshops, training workstations or in the industry.

KEMPER STATIONARY ELECTROSTATIC  FILTER

For the use at changing working positions or at one or two workstations stationary electrostatic welding smoke filters with two exhaust arms are a cost-saving alternative to two separate units and are very suitable for flexible use in workshops, training workstations or in the industry.

KEMPER STATIONARY CARTRIDGE FILTER

For the use at changing working positions or at two workstations stationary cartridge filter units with one or two exhaust arms are a cost-saving alternative to two separate units and are very suitable for flexible use in workshops, training workstations or in the industry.

> FILTER CELL SYSTEMS

KEMPER FILTER CELL

The Kemper Filter Cell is a highly compact, stationary filter unit for use on evacuation hoods, evacuation tables and production systems.

KEMPER FILTER CELL XL

The KEMPER Filter-Cell XL is a compact, stationary filter unit with self-cleaning filter for use on extraction hoods, evacuation tables and production systems.

> MODULAR EXTRACTION HOOD

KEMPER MODULAR EXHAUST HOOD

The new modular extraction hood from KEMPER can be adapted to fit any individual requirement. It is available in different sizes as standard.

> ROBOCAB WITH INTEGRATED EXTRACTION

KEMPER ROBOCAB

The KEMPER robocab is a robot booth with integrated extraction. Its modular design allows the size of the booth to be adapted to the size of the welding robot. The robocab is suitable for the robotic welding of small to medium sized components.

> ELECTRONICS INDUSTRY EXTRACTION

KEMPER SOLDERING WORKSTATIONS

The KEMPER Extraction System for Soldering Workstations in the Electronics Industry

> EXTRACTION TABLES

KEMPER GRINDING TABLES

At welding workstations grinding has to be done very oftenl. Whether before or after the welding work - by using KEMPER grinding tables it is always clean and safe. The tables, which are available in different sizes, can be connected to a central extraction and consequently be integrated in the whole extraction concept.

KEMPER WELDING  TABLES

Kemper Welding Tables have especially been developed for the handling of smaller metal workpieces. The ergonomical adapted stable sheet steel construction and the robust material support enable a comfortable and safe functioning. A dust collecting drawer allows a safe cleaning of the table. The welding tables, which are available in different sizes, can be connected to fans or to a central extraction and filter system. Welding table Stable welded steel table with multi layerd paint, grating, dust collection drawer.  

KEMPER FILTER  TABLES

KEMPER Filter-Table welding table with integrated fan and filter.
This heavy duty down-draft welding table is molded from rigid, powder coated sheet metal.
The unit features a 2-stage filtering and is particularly suitable for fumes and dusts produced during the welding and cutting process:
• Sparks are captured by an aluminum pre-filter mesh to prevent the unit from catching fire

HAND PLASMA TABLES

Hand Plasma Tables have mainly been developed for the use in training workshops. The workpiece clamping unit can be operated comfortably, so that both hands keep free. The workpiece clamping unit is made out of 10 mm steel and is suitable to take hand plasma unit to cut workpieces for the welding preparation. The table will be connected to a central extraction and filter unit or a fan so that generated dusts are not able to pollute the working environment.

> PROTECTIVE EQUIPMENT

KEMPER AUTODARK ELECTRONIC WELDING HELMETS

KEMPER autodark® Electronic Welding Helmets.

A flexible helmet with stepless adjustment of the darkening shade that is controlled by a microcontroller.
Solar powered welding protection helmet – no battery change required.

KEMPER WELDING CURTAINS S9

Welding curtain S9, dark green, matt, EN 1598
The curtains have reinforced edges with strengthened eyelets spaced 21 cm apart on the top edge.
To connect the curtains there are additional fasteners located on the outer edges.
The material has a thickness of 0.4 mm.
The curtains can be suspended either with metal hooks on a pipe or with sliding hooks in a C-profile.
A horizontal movement of the curtains is possible for both alternatives.

KEMPER WELDING STRIP CURTAIN S9

Welding strip curtain S9, dark green, matt, EN 1598

KEMPER WELDING PROTECTION STRIP S9

Welding protection strip S9, dark green, matt, EN 1598

KEMPER MOBILE WELDING PROTECTION SCREEN

Mobile protective screen with curtain.
Stable construction out of box section 60 x 30 mm with blue epoxy-powder coating. The curtain is attached to the construction by means of metal hooks. Available in 1-Panel or 3-Panel Construction.

KEMPER RIGID WELDING PROTECTION SCREENS

Rigid Screens

Rigid screens for use in protection cabins are available in Red or Green

KEMPER WELDING BLANKETS

Welders Blanket protects from welding spatters, flying sparks, grinding sparks. Cloth made out of E-glass yarn with 9 µm filament diameter, double-sided with high-temperature coating, asbestos-free. Heat resistant up to 1.100 °C / permanently.
Other temperature and types available.

> LARGE FILTER SYSTEMS

KEMPER SYSTEM 8000

KEMPER system 8000
KEMPER KemTex® ePTFE membrane filters

KEMPER SYSTEM 9000

KEMPER system 9000
KEMPER KemTex® ePTFE membrane filters

> BOOTH SYSTEMS

KEMPER BOOTH SYSTEM
for Schools

KEMPER soundproofing and partition wall systems are also available for schools and training workshops.

The Kemper Booths consist of perforated plates
that are coated with a UV inhibitor. The soundproofing material used is a biodegradable mineral wool with a carcinogenicity index of 40 (Ki 40) rendering it safe (see Technical Rules for Hazardous Substances (TRGS) 905), and non-flammable according to DIN 4102....

 


KEMPER FILTER-MASTER

The Filter-Master, a mobile mechanical filter, is designed and ideally suitable for use at various welding workplaces and conditions. Built of rigid a sheet metal construction and finished with incorporating anti corrosive powder coating the Filter-Master is designed for every day use. Four heavy duty rubber castors allow ease of movement within the factory and the extraction arm can be swiveled by 360°. It is therefore very easy to direct the arm into any desired position. The Filter-Master is the ideal solution to your extraction problems.

The contaminated air captured by the extraction hood is separated from rough particles by a prefilter. Thus, the prefiltered air is directed through the subsequent main filter with a filter efficiency of more than 99.9 % and the clean air is fed back to the workshop by two lateral blow-grids integrated in the machine. A control light indicates a necessary replacement of the filter insert. To replace the filter, the top cover is folded back. The life expectance of the filter is subject to the application of the Filter-Master.

When not in use the mains cable can be stored on the cable holder. All necessary controls, indicators and instructions are shown on the detailled control panel.


Part Number

Description

Information

Information

KM.64.100.100

Filter-Master  with one exhaust arm, 2.0 m, Ø 150 mm

FilterMaster Picture

Operating Manual

KM.64.100.101

Filter-Master  with one exhaust arm, 3.0 m, Ø 150 mm

Operating Manual

KM.64.100.102

Filter-Master  with one exhaust arm, 4.0 m, Ø 150 mm

Operating Manual


FILTER-MASTER XL

The Filter-Master XL is the basic type of filter units with high efficient KemTex® ePTFE membrane filter cartridges.

A great advantage of KemTex® ePTFE membrane filter cartridges - in addition to its high separation efficiency - is the possibility of cleaning them.
The control of the Filter-Master XL monitors the collected dust on the surface of the filter media and activates the neccesary cleaning cycle.

The unit can be equipped with a 2 m, 3 m or 4 m exhaust arm. Within its range, it can easily be brought in every position, which remains self-supporting.

The included KEMPER exhaust hood is rotatable by 360° and can be adapted to the welding joint because of its rectangular shape.

Part Number

Description

Information

KM.62.100.100

Filter-Master XL with one exhaust arm, 2.0 m, Ø 150 mm

FilterMaster XL Picture

Operating Manual

KM.62.100.101

Filter-Master XL with one exhaust arm, 3.0 m, Ø 150 mm

Operating Manual

KM.62.100.102

Filter-Master XL with one exhaust arm, 4.0 m, Ø 150 mm

Operating Manual
 
 
Back to content | Back to main menu